CornerBoard Edge Protectors
Available in sizes and lengths ranging from 7" to over 24'. 
Standard calipers range from .080" to .225". 
Custom thickness and lengths can be manufactured for your special applications.

Standard leg lengths measure 2" x 2", 2.5" x 2.5", 3" x 3" inches; Custom leg lengths can also be manufactured for your special applications.


CornerBoard Product Specifications
Length
Plus or minus 1/8" on 48" and shorter boards.
Anything over 48" will be plus or minus 3/8 of 1% of length
Example: 144" x .375% = .54" or plus or minus a little over ½ inch

Leg Dimensions
Plus or minus 1/4" on even legs (3x3, 2x2, etc.), or plus or minus 1/2" on offset legs (2x4, 1x3, etc.) 
All CornerBoard legs are measured on the underside, from the edge of one leg to the other leg where it meets the radius

Thickness  
Plus or minus 5% of the CornerBoard caliper. Example: .225" CornerBoard is within thickness tolerance if it is between .213" and .237"

Angle
85 degrees - 110 degrees
CornerBoard is manufactured using recycled paperboard
These products are initially formed less than 90 degrees, but because the memory of the paperboard the CornerBoard normally will be more than a right angle

Packaging
Click Here to view our packaging standards